沸石对降雨径流中氨氮的吸附特性

城市面源污染是重要水体污染源之一,降雨发生时,雨水径流会携带累积在路面、屋面的含有机物、氮磷、重金属等污染物质进入水体,其中氮磷是造成水体富营养化的重要因素。针对这一情况,采用不同种类沸石,对雨水径流中的氮磷进行了吸附研究,着重考察了沸石对氨氮的吸附动力学,吸附等温线特征,并考察了p H、共存阳离子以及COD对吸附能力的影响。结果表明,Na型改性沸石吸附性能优于其他2种,饱和吸附量达到9.09 mg/g,沸石的吸附过程符合准二级动力学模型。Mg2+、Ca2+对Na型改性沸石的影响较大,Na型改性沸石吸附氨氮的适宜p H为5~8。本研究为探索用物化方法来处理雨水提供了依据,Na型改性沸石可以作为吸附雨水中氨氮的优选吸附剂。     

建筑垃圾对雨水径流中Cu的吸附特性

以砖混建筑垃圾为研究对象,采用人工模拟雨水,通过静态和动态吸附实验研究了不同粒径粒级建筑垃圾对雨水径流中Cu的吸附效果。结果表明,准二级动力学模型比准一级动力学模型能更好地描述建筑垃圾对Cu的吸附过程;Freundlich等温模型能较好地拟合其等温吸附过程;不同粒径粒级建筑垃圾均对雨水径流中的Cu具有较好的净化效果,去除率均超过90%,粒径粒级越小,对Cu的净化效果越好,但其渗透性能越差;建筑垃圾的粒径粒级对Cu的吸附平衡时间、吸附速率和吸附量具有重要影响,粒径粒级2.36~4.75 mm的建筑垃圾对Cu的平衡吸附速率和平衡吸附量最大,分别为4.1μg/min和12.4μg/g。     

腐殖酸修饰凹凸棒对U(Ⅵ)的吸附性能及机理

采用腐殖酸(HA)修饰凹凸棒(ATP)制备得到腐殖酸/凹凸棒(HA/ATP),用于去除废水中的U(Ⅵ).通过静态吸附实验,研究了溶液初始pH、投加量、吸附时间和初始浓度对吸附的影响,并用扫描电镜(SEM),X射线能谱图(EDS),傅里叶红外光谱仪(FITR)分析吸附机理.实验结果表明,去除率随时间的增大而增大,在120 min内可以达到平衡;吸附剂投加量越大,溶液pH =6左右时越有利于U(Ⅵ)的去除;HA/ATP能多次重复使用,且经过5次吸附解吸后对U(Ⅵ)的去除率仍能达到96％.吸附过程均符合Langmuir和Frendlich等温方程.较之准一级动力学,准二级动力学模型能更好地拟合实验数据.SEM-EDS、FITR分析结果表明,U(Ⅵ)被成功地吸附到了HA/ATP的表面,吸附机理为络合作用.     

分子筛吸附法脱除废水中的聚丙烯酰胺

聚丙烯酰胺(PAM)用于油田驱油产生大量难处理的含聚废水。以分子筛为吸附剂处理含聚废水,研究分子筛类型(Y、Beta和ZSM-5,H型和Na型)和物化性质对其吸附PAM性能的影响,并测定吸附等温线。结果表明,吸附性能顺序为BetaYZSM-5,H型优于Na型。H-Beta对PAM的吸附来自分子筛中阳离子与PAM中阴离子的静电作用,Si—O和Al—OH与PAM中酰胺基的氢键作用。H-Beta开放的通道结构,较高的介孔比例和表面积,较强的酸性和良好的酸中心可接近性使其具有优异的吸附性能。Si O2/Al2O3=26的H-Beta对浓度为200 mg/L的PAM溶液,PAM脱除率可达95.2%。在低PAM平衡浓度时,PAM在H-Beta上的吸附符合Langmuir单层吸附特征,饱和吸附量达70.2 mg/g,在高浓度区域则由于PAM疏水缔合作用加强呈现多层吸附。     

改性粉煤灰合成沸石对甲基橙的吸附动力学

以粉煤灰(FA)为原料,采用水热晶化一步法制备了Na P1型沸石(ZFA),对合成产物的结构进行了表征,并采用阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)对其进行改性。通过静态吸附实验,研究了改性后Na P1型沸石(MZFA)对水溶液中甲基橙的吸附特性,从动力学角度探讨了吸附机理。结果表明,在所研究的浓度条件下,改性Na P1型沸石对甲基橙的吸附符合Langmuir等温吸附方程,在25℃时,静态饱和吸附量(Qm)为64.76 mg/g。动力学分析表明,改性Na P1型沸石对溶液中甲基橙的吸附符合准二级动力学模型。     

高炉渣对Cd~(2+)的吸附性能

采用包头钢铁集团炼铁厂的高炉渣为吸附剂(粒径0.154 nm)对Cd2+进行吸附,运用SEM技术对吸附剂进行了表征,研究了初始Cd2+质量浓度、吸附剂加入量、吸附时间、吸附温度和废水pH对Cd2+去除率的影响,并探讨了吸附机理。表征结果显示:高炉渣吸附剂具有疏松多孔的特点,表面十分粗糙,比表面积较大。实验结果表明:当吸附温度为室温(28℃)、废水pH为7、初始Cd2+质量浓度为10 mg/L、吸附剂加入量为8 g/L、吸附时间为60 min时,Cd2+去除率达到98.55%;高炉渣对Cd2+的吸附符合拟二级动力学方程和Langmuir等温吸附模型,且吸附反应易发生。     

Using empirical models of species colonization under multiple threatening processes to identify complementary threat‐mitigation strategies

Approaches to prioritize conservation actions are gaining popularity. However, limited empirical evidence exists on which species might benefit most from threat mitigation and on what combination of threats, if mitigated simultaneously, would result in the best outcomes for biodiversity. We devised a way to prioritize threat mitigation at a regional scale with empirical evidence based on predicted changes to population dynamics—information that is lacking in most threat‐management prioritization frameworks that rely on expert elicitation. We used dynamic occupancy models to investigate the effects of multiple threats (tree cover, grazing, and presence of an hyperaggressive competitor, the Noisy Miner (Manorina melanocephala) on bird‐population dynamics in an endangered woodland community in southeastern Australia. The 3 threatening processes had different effects on different species. We used predicted patch‐colonization probabilities to estimate the benefit to each species of removing one or more threats. We then determined the complementary set of threat‐mitigation strategies that maximized colonization of all species while ensuring that redundant actions with little benefit were avoided. The single action that resulted in the highest colonization was increasing tree cover, which increased patch colonization by 5% and 11% on average across all species and for declining species, respectively. Combining Noisy Miner control with increasing tree cover increased species colonization by 10% and 19% on average for all species and for declining species respectively, and was a higher priority than changing grazing regimes. Guidance for prioritizing threat mitigation is critical in the face of cumulative threatening processes. By incorporating population dynamics in prioritization of threat management, our approach helps ensure funding is not wasted on ineffective management programs that target the wrong threats or species.     

Getting caught up in the game: managing non-formal dynamics in the remediation of contaminated sediments in Oslo harbor

This study aims at describing, analyzing and evaluating the relation between management styles and process dynamics of a complex planning process confronted with unexpected dynamics. The development of an aquatic disposal site for dredged contaminated sediments in Oslo was managed by a project management style focused on timely and cost-effective implementation. Coupling the remediation project with another infrastructural project and the actual construction of the site led to unexpected dynamics in terms of resistance and controversy. Project management had difficulties in adjusting its style accordingly, resulting in even more delay and resistance. Managing complex planning projects requires a style suitable to the characteristics of the project and the capability of adjusting it to changing circumstances. The paper concludes with some explanations why it is difficult to change management styles in complex planning and implementation processes and complexity-embracing approaches to deal with this.     

吸附—电化学法组合工艺处理废乳化液

以季铵盐改性硅藻土为吸油剂,采用吸附—电化学组合工艺处理拉丝废乳化液,优化了工艺条件。实验结果表明,在乳化液pH为5.0、吸油剂加入量为20 g/L、反应温度为25 ℃的最优条件下吸附除油15 min,然后在清液pH为8.5、阳极电流密度为4 A/dm²的最优条件下电化学反应4 h后,废水无色无味,COD为43 mg/L,ρ（NH₃-N）=0,ρ（Cu）= 1.6 mg/L,ρ（Zn）= 3.7 mg/L,浊度为1.1 NTU,达到GB 8978—1996污水综合排放标准。     

磁性生物炭负载Mg-Fe水滑石的制备及其吸附水中Cd（Ⅱ）和Ni（Ⅱ）的性能

合成了一种高吸附容量的磁性生物炭负载Mg-Fe水滑石复合材料（L-BC）,并用于去除水中的Cd²⁺和Ni²⁺。表征结果表明,采用浸渍联合热解法成功制备了磁性生物炭（M-BC）,水热合成法成功地将Mg-Fe水滑石负载在M-BC上。动力学研究结果表明,Cd²⁺和Ni²⁺吸附符合伪二级动力学模型,化学吸附为速率控制步骤。等温吸附研究结果表明,L-BC对Cd²⁺和Ni²⁺的吸附符合Langmuir模型,为单分子层化学吸附,最大吸附量分别为263.156 mg/g和43.291 mg/g。吸附机理主要为Mg-Fe水滑石层间CO₃^2-和表面羟基与Cd²⁺和Ni²⁺产生表面共沉淀。L-BC具有良好的吸附和重复利用性能,是一种很有前景的去除Cd²⁺和Ni²⁺的吸附材料。